Density Series

The bone densitometers Density series are planar scanners, consisting of a fixed table and a "U" arm, which moves along the longitudinal direction, from the foot to the patient's head (X axis).
On the arm is mounted an assembly generator - RX detector, mechanically aligned so that the collimated beam of x-ray centers perfectly the detector.
Generator and detector shift simultaneously along the transverse direction (Y-axis), by means of a transmission belt and gears.
In this way an X-Y scanning in a specific region of interest of the patient is realized.

Actually there are 4 models available: Pencil Beam and Fan Beam units in whole body or compact version.

Density series are the first bone densitometers to employ the patented suspended arm architecture. Their one-piece solid aluminum frame makes Density ’s design both pleasant and practical. This innovative feature allows to have open space under the table, making it easy to access any part of the device for cleanings and maintenance, improving the sanitation of the room where the unit is installed: no dirty or dust hiding under the machine!

 

Thanks to their layout and to an adaptive system of energy discrimination and of the currents selection of the tube of the x-ray generator, Density series densitometers reduce patient dose to the minimum, the dose adapting to patient’s morphology and maintaining an high quality level of the images.

 

The software has been specifically designed to be easy-to-use and to a have a very gentle learning curve. It has been conceived from the user’s point of view and it includes a set of automatic tools that make scans easy and quick to carry out.

AUTOMATIC SEGMENTATION: for each area, the software can identify the regions of interest. The user has just to review and confirm.
SINGLE WINDOW: all operations are performed in a single window, there is no need to open and close multiple windows to access specific functions.
AUTOMATIC DAILY QUALITY CONTROL: no external Phantom. The Quality Control Phantom is mounted directly under the table and the unit automatically performs QC tests and measurements.
MULTI-LANGUAGE:  devised for windows 10, the software can be fully provided with a specific requested language.
BODY MASS COMPOSITION (optional): this module, available only on wholebody models (PB and NFB), provides an accurate analysis of the body mass composition  (fat mass, lean mass, fat %, lean %, BMI)
REMOTE ASSISTANCE: in case of any problems, it is possible to organize a remote assistance session.

Density series are bone densitometers for all: Easy to access for disabled and elderly people with mobility problem. Table height is just 60cm.

NOTICE: in compliance with Article 21 of Legislative Decree No. 46 of 24th February 1997 and subsequent modifications and additions and in accordance with the Guidelines of the Ministry of Health of 17th February 2010, we inform you that part of the information published on our web site is exclusively meant for Health Professionals and Operators. Searching within our web site and accessing to information related to products, technical and commercial descriptions are subject to declaration by the user who, under his/her own responsibility, declares himself/herself to be a Health Professional.

- If you aren't a Health Professional and Operator go to homepage by clicking here.

- If you are a Health Professional and Operator , click here to continue navigation.

Il densitometro osseo Density è uno scanner planare, costituito da uno stativo fisso e da un braccio a “U”, che trasla lungo la direzione longitudinale, dai piedi alla testa del paziente (asse Y).
Sul braccio è montato un assieme generatore-rivelatore RX, meccanicamente allineati in modo che il fascio collimato di raggi X centri perfettamente il rivelatore.
Generatore e rivelatore traslano in modo solidale lungo la direzione trasversale (asse X), mediante una trasmissione a cinghie e ingranaggi.
Si realizza in questo modo una scansione X-Y di una determinata regione di interesse del paziente.
Durante il movimento lungo l'asse Y, vengono acquisite una o più righe di un'immagine per attenuazione di raggi X, mentre la traslazione lungo l'asse Y serve solo ai fini del posizionamento alla riga successiva.

L'elettronica è costituita da tre sottosistemi: un generatore RX, un rivelatore e un'unità di controllo. Quest'ultima implementa l'acquisizione dei segnali provenienti dal rivelatore, il controllo della movimentazione (motori, tastiera, fine corsa), il controllo dell'emissione raggi, l'arresto di emergenza e la comunicazione con la workstation.

Grazie al disegno innovativo, alla nuova sorgente a raggi X e alle caratteristiche avanzate del processore impiegato ed al processore di ultima generazione, la velocità di scansione è ridotta ad 80s per esami di tipo "fast" e 120s per esami in modalità standard (colonna AP). Una scansione di corpo intero può richiedere un tempo minimo di circa 6 minuti.

Sulla workstation, tipicamente un PC commerciale in ambiente Windows, è installato il software per densitometria ossea, il quale costituisce l'unica interfaccia tra operatore e macchina, esclusi  una tastiera per la movimentazione del braccio (montata a bordo macchina), il pulsante per l'arresto di emergenza e l'interruttore di alimentazione.

Il software è stato specificamente concepito per essere facile da usare, sviluppato a partire dal punto di vista dell’operatore, al quale vengono forniti un insieme di strumenti automatici che rendono le operazioni semplici e veloci.

Un'attenzione particolare è stata riservata al design della macchina, che presenta caratteristiche innovative quali il telaio monoscocca in alluminio e il braccio sospeso al tavolo porta-paziente. La progettazione meccanica ha curato non solo l’aspetto estetico, che risulta essere assolutamente originale, ma anche l'ottimizzazione di una serie di aspetti costruttivi della macchina, quali facilità di installazione e manutenzione (riduzione dei costi), essenzialità, rumorosità e vibrazioni, peso e stabilità, etc. Lo spazio aperto sotto il tavolo permette di avere accesso facilmente ad ogni parte della macchina per attività di pulizia e manutenzione, migliorando la sanificazione dell’ambiente in cui l’unità è installata.

Il design del densitometro modello Density in considerazione di tutti questi aspetti ha in corso il deposito di 3 brevetti internazionali.

In conformità all'articolo 21 del decreto legislativo no. 46 del 24 febbraio 1997 e s.m.i. ed in accordo alle linee guida del Ministero della salute del 17 febbraio 2010, vi informiamo che parte delle informazioni pubblicate in questa parte del sito che volete visitare sono rivolte esclusivamente ad operatori e professionisti medici.
Per effettuare ricerche in questa sezione del sito o per accedere ad informazioni tecniche e commerciali del prodotto sono soggette alla dichiarazione da parte dell'utente, sotto la propria responsabilità, di essere un professionista medico.

- Se non siete un professionista o un operatore medico, per favore tornate alla homepage cliccando qui.

- Se siete un professionista o un operatore medico, cliccate qui per proseguire nella consultazione.